You have no items in your shopping cart.
Product Details
| Cat # +Size | K4903-100 |
|---|---|
| Size | 1 x 96 assays |
| Detection Method | Absorbance (450 nm) |
| Species Reactivity | Mammalian |
| Applications | This rat Adiponectin ELISA Kit is an enzyme-linked immunosorbent assay (ELISA) for quantitative determination of adiponectin in rat serum, plasma or various tissue or cell culture supernatants |
| Features & Benefits | • Simple procedure • Fast and convenient • Cross Reactivity: No significant cross-reactivity or interference between this analyte and its analogues was observed. |
| Kit Components | • Antibody coated 96-well plate (12 x 8 well strips) • 10X Wash concentrate, 50 ml • 5X Diluent, 50 ml • Secondary antibody, 12 ml • 100X Detector (HRP conjugated mouse IgG), 150 µl • Standard (recombinant rat adiponectin from HEK 293cells), 1 vial, lyophilized (48 ng) • QC sample= a positive control of rat serum adiponectin, 1 vial, lyophilized (12.67 μg) • Substrate I, 6 ml • Substrate II, 6 ml • Stop solution, 12 ml |
| Storage Conditions | 4°C |
| Shipping Conditions | Gel Pack |
| USAGE | For Research Use Only! Not For Use in Humans. |
Details
Adipose tissue secretes a number of biologically active soluble factors (collectively named adipocytokines) that regulate glucose and fatty acid metabolism. Measurement of serum adiponectin levels gives us important information on the role of adiponectin in regulation of glucose and/or lipid metabolism. This Rat Adiponectin ELISA Kit is an enzyme-linked immunosorbent assay (ELISA) for quantitative determination of adiponectin in rat serum, plasma or various tissue or cell culture supernatants. In the assay, polyclonal antibody specific for rat adiponectin has been pre-coated onto 96 well microplate. Standards and samples are pipetted into the wells and any adiponectin present is bound by immobilized antibody. The bound adiponectin is then captured by anti-rat adiponectin monoclonal antibody. With adding HRP conjugated mouse IgG and HRP substrate, the colors developed in proportion to the bound adiponectin, can be easily measured by Elisa plate reader.
Why buy BioVision Products?
 |
 |
 |
 |
Innovation |
Affordability |
Global Presence |
Technical Support |
BioVision aims to provide our customers innovative tools for accelerating drug discovery and biological research. BioVision offers >8,000 products including the most comprehensive array of assay kits for key targets in Metabolic pathways. |
BioVision is committed to providing the highest quality products at a competitive price. |
We have a broad network of global distributors who are ready to address your research needs and ensure fast delivery. |
Our highly trained Technical Support team provides comprehensive product support and is dedicated to resolving your issues quickly and efficiently. |
What is a sandwich ELISA?
The analyte of interest in a sample is "sandwiched" by an immobilized capture antibody coated on the plate and a labeled antibody used for detection. Sandwich ELISA is very sensitive. The density of color is proportional to the amount of analyte captured from the samples and can be quantified when compared with standard curve.
What is a competitive ELISA?
The endogenous unlabled analyte of interest in a sample is "competed" by the exogenous labeled antigen coated on the plate for a limited amount of antibody binding sites. Therefore, the lower signal indicate higher concentration of the analyte.
What dilution range should I use for the samples?
A preliminary experiment is always recommended when working with new samples and ELISA Kits to ensure all results fall within the detection range.
Can I extend the standard curve (in either direction)?
Extended standard curve is not recommended by BioVision.
What type of software is needed to graph a 4-parameter or 5-parameter curve?
SoftMax Pro by Molecular Devices, SigmaPlot® by Systat Software Inc., or others can be used for this purpose.
Low absorbance; No signal
Target present below detection limits of assay
Reduce dilution factor to increase sample concentration (Preliminary experiment is recommended for optimal dilution range)
Incompatible sample types
Use samples recommended by the kit
Standard dilutions are unstable
Use fresh standard dilutions
Buffers/substrates are contaminated
Use new buffers and substrates
Insufficient incubation time
Extend incubation time
Cover or seal plates during all incubation
Plate washings too vigorous
Pipette wash buffer gently or make sure the automatic wash system has correct pressure
Wells scratched with pipette or washing tips
Use caution when dispensing and aspirating into and out of wells
Incubation temperature too low
Ensure incubations are carried out at temperatures recommended by the manual
Reagents are cold
Bring all reagents to room temperature before each assay
Plate read at incorrect wavelength
Ensure the plate reader is set at the correct wavelength recommended on the protocol
High Background
Insufficient washing
Increase number of washes; Add a 30 second soaking step in between washes; at the end of each washing step, invert plate on absorbent tissue to completely drain all wells
Residual buffer/substrates remain in wells
Remove all residual buffer and substrates at the end of each wash
Too much HRP-Streptavidin
Centrifuge and mix the substrate vial before use to avoid percipitation and inconsistent HRP concentration
Excessive incubation time
Reduce incubation time
Substrate incubation carry out in light or wait too long to read plate after adding stop solution
Avoid light during incubation and read signals immediately after adding stop solution
Standards improperly reconstituted or diluted
Briefly spin vials before opening; inspect for undissolved material after reconstitution
Poor standard curve
Standard improperly diluted
Confirm dilutions are made correctly
Standard dilutions are unstable
Use freshly diluted standards
Pipetting error
use calibrated pipette and stay consistent between each pipette
Curve doesn't fit scale
Try plotting using different scales (log-log, 4 parameter logistic, 5 parameter etc.)
Large intra-coefficient of variation (CV)
Bubbles in wells
Avoid bubbles during experiment, eliminate all bubbles prior to reading
Insufficient washing
Increase number of washes; add a 30 second soak step in between washes; at the end of each washing step, invert plate on absorbent tissue to completely drain all wells
Wells not washed equally/thoroughly
Use calibrated (automated) multi-channel pipette for consistent handling, make sure all parts of the automated washer are unobstructed
Edge effects
Seal the plate completely during incubation
Incomplete reagent mixing
Make sure all reagents are mixed thoroughly during each step
Inconsistent sample preparation or storage
Consistent sample preparation. Optimize sample storage conditions and minimize freeze and thaw cycles
Stacked plates
Avoid stacking plates during incubation
Plate sealers not used or reused
Cover assay plate with plate sealer, use a fresh sealer each time to prevent contamination
Large inter-coefficient of variation (CV))
Insufficient washing
Increase number of washes; add a 30 second soak step in between washes; at the end of each washing step, invert plate on absorbent tissue to completely drain all wells
Inconsistent incubation temperature
Make sure to follow recommended incubation temperatures. Avoid fluctuations in temperature due to environmental conditions.
Plate sealers not used or reused
Cover assay plate with plate sealer, use a fresh sealer each time to prevent contamination
Theriau, Christopher F. et al. (2016) Voluntary physical activity abolishes the proliferative tumor growth microenvironment created by adipose tissue in animals fed a high fat diet J Appl Physiol (1985). 2016 Jul 1;121(1):139-53.
For more citations of this product click here
